PRODUCTS

Adapters for welding tables

Our adapters are bases designed to allow the adaptation of toogle clamps and pliers directly to welding tables. Simplify your welding process, increase efficiency and precision with our welding table adapters.

See All

Vertical hold-down toggle clamp

The vertical clamps, are toggle clamps that when locked the cable is it in the vertical, they are formed by a base that can be adapted and a arm where the fixation tip goes. More information in the video!

See All

Horizontal hold-down toggle clamp

The horizontal clamps, are toggle clamps that when locked are with the cable in the horizontal, they are formed by a base that can be adapted and an arm that goes where the fixation tip. Check out more information in our video!

See All

Reinforced horizontal clamps

Reinforced horizontal toggle clamps are clamps that perform the same function as horizontal clamps, when locked, they keep the cable horizontal, but they have a reinforcement, which is provided through an extended base and an extra rivet that serves as a guide.
This reinforcement gives the clamp a greater holding force than its size would allow, through the common three-point fastening system.

In this way, the reinforced clamp can be used in applications that require a greater holding force, but with a reduced space.

See All

Pull action latch clamp

Pull action clamps are toggle clamps, formed by a base R straight base or D base folded, the bases can be welded or screwed. The arm can be short or long, in addition to the standard arma, we have several measures on request. We also have some models of clamps that can be used with a padlock or any other security mechanism when locked. Another model option for the pull action clamps are the pull action clamp with strip, which can have their diameter adapted according to the customer's needs.

See All

Pull action latch clamp with strap

These clamps are indispensable in applications that need to be fixed in diameter, mainly in cylindrical products such as tubes or drums. The belt has the function of joining and sealing a more malleable material to a resistant and rigid material.
See more information by watching our video!

See All

Straight line action clamp

The straight line clamps are activated by the cable, which moves the plunger and when reaching the end of the lock stroke, retaining all the effort exerted against it, the straight line clamps lock at the end of the stroke, both open and closed.
Learn more about torpedo clips in our video!

See All

Straight line action clamp with hand handle

The thermal presses, they are machines that use the sublimation method for stamping various products and materials., for example, pens, mugs and fabric, in them we use our clamps KF-057, KF-054 and KF-052. They are used in order to press the product without the operator needing to hold the material during the sublimation process.
Check out the full video!

See All

Straight line action clamp with turning

This new Kifix clamp has the advantage of the swivel arm that provides quick fixing in small spaces. The arm is guided by a helix that makes a 90 movement, in this way the clamp brings more freedom as it is more compact. This clamp model can be rotated clockwise or counterclockwise, depending on your needs!

See All

Straight line action clamp frontal

See All

Straight line action clamp square plunger

See All

The double clamps

The double fixing clamp has the main advantage of having two fixing points, being able to fix and position in the same operation.
It can perform the same function as a streight line clamp and a horizontal clamp in the application. It can also be used to join parts or pipes at 90 degrees. It is primarily used in soldering devices, where the exact positioning and secure attachment of each component is extremely important.

See All

Compressor clamp

Compressor clamps do the opposite process of pull action clamps, retention happens when it compresses the material, the carver clamp works the same way, but the difference between the two is that the compressor clamp needs to be fixed, it is more used in machine devices and has a limited opening measure.

See All

Carver clamp

The carver clamp has its mobile application and can be taken to other places, it is most used in manual work, in the locksmith shop or welding to perform the tightening of two pieces, and can be used in larger areas, as the opening measure can vary.

See All

Variable Stroke

The Variable stroke are clamps formed by a KFRF front base or KFRL side base, a spindle (M12; M16 or M20). That allows the application of the clamp where there is dimensional variation of the piece to be worked, the mechanism works with a lever to release a large stroke and a handle for fine adjustment.

See All

Handles

The handles can be applied in projects where the customer has only the spindle, to make manual handles, or handles instead of the cables, or in applications that have the need for rotary movements.

See All

Pneumatic clamp

The advantage of this type of clamp is the automation of the activation and withdrawal of the clamp. The activation is basically the same as the manual one, the pneumatic cylinder does not exert force, its function is solely and exclusively to open and close the clamp, the retention is made by the three-point system on the clamp body.

See All

Squeeze Action Clamps

Squeese Action Clamps that are used to clamp one or more objects. They have long or short L-shank, also the option of open handle which facilitates handling with gloves for high temperatures, CA nomenclature. They are formed by two arms with a spindle in each, the spindle that is most used is the hexagonal, but it can be changed for any other if necessary, in the spindle you can adjust the clamping force. They are locked until the central lever is activated, which releases it.

See All

Handle

The handle cable is another Kifix development to serve the market, and can be used with the clamp or separately.

See All

Spindle

We have different types of spindles
The hex head is our standard spindle, which we ship with the clamps as it is widely used, but it is also important that we show all our splindles types as they can meet different needs.

See All

Hinges

The hinges are fastening elements used to make the movement of the joint, they are mainly used to make the union between the moving parts of injection molds or cold room doors.

See All

Latch

The latch is normally used to close the mold door, being positioned on the outside.

See All

KNOW OUR COMPANY

Kifix - Grampos de Fixao, Company headquartered in the state of Rio Grande do Sul, in the city of Caxias do Sul, manufacturing quick clamping system since 2004.It provides over 700 high quality products, directed to the most varied branches of industrial activities.

CLAMPING SYSTEM

Know how our quick clamping system works.Made from zinc or stainless steel, models have a retention that varies from 30 to 3400 Kgf.

Know more
Grampo Kifix